List of Publications

Journals

  1. Nimel Sworna Ross, C Gopinath, N. Srinivasan, Munish Kumar Gupta, Ragavanantham Shanmugam, M Saravana Kumar, Mehmet Boy, Mehmet Erdi Korkmaz (2022) “Impact of hybrid cooling approach on milling and surface morphological characteristics of Nimonic 80A alloy”, Journal of Manufacturing Processes, Elsevier, vol. no. 73, pp. 428-439.
  2. N. Srinivasan, Rajenthirakumar, D., Sridhar, R., & Amutha, P. (2020) “Tribomechanical performance of MgO– ZnO nanoparticles as lubricating additives in the microextrusion process” Part C: Journal of Mechanical Engineering Science, SAGE, Vol. 234, no. 22, pp. 4543-4553.
  3. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Numerical Simulation of Micro Forming of Bio- Absorbable AZ80 Magnesium Alloy”, Advances in Computational Methods in Manufacturing, Springer, no.1, pp 3-11.
  4. N.Srinivasan, D.Rajenthirakumar, R.Sridhar, (2019) “Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation”, International Journal of Advanced Manufacturing Technology, Springer, vol. 102, no. 9-12, pp. 3531-3541.
  5. T.Karthik, D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Influence of roller ball tool in single point incremental forming of polymers”, Technical Gazzette, vol. 26, no. 1, pp. 171-176.
  6. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2018)“Experimental investigations on micro scaled plastic deformation of bio-absorbable magnesium AZ80 alloy”, Procedia Manufacturing, Elsevier, 15, pp.1635–1640.
  7. N. Srinivasan, D. Rajenthirakumar, R. Sridhar, (2017) “Micro Forming – Key Issues and Research Opportunities”, Advances in natural and applied sciences, 11(4), 557-579.
  8. N. Srinivasan, D.Rajenthirakumar, R.Sridhar, (2020) “Combined influence of size effect and temperature in micro scale deformation of 6063 aluminium gear”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, vol. 42 no. 317, pp. 1-10.

Conferences

  1. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Development of a Micro-forming System for Micro-extrusion Process of micro-pin in AZ80 Mg Alloy”, 4th International and 19th National Conference on Machines and Mechanisms, 05-07, December 2019. IIT Mandi, India.
  2. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Numerical investigation on micro forming of bioabsorbable AZ80magnesium alloy, 2nd International conference on computational methods in Manufacturing during March 8-9,2019, organized by IIT Gawahati, India.
  3. D. Rajenthirakumar, N. Srinivasan, R. Sridhar, “Experimental investigations on micro scaled plastic deformationof bio-absorbable Magnesium AZ80 alloy” Metal Forming 2018 conference, Toyohashi University of Technology, Japan, 16-19 September 2018.

Journals

  1. Nimel Sworna Ross, C Gopinath, N. Srinivasan, Munish Kumar Gupta, Ragavanantham Shanmugam, M Saravana Kumar, Mehmet Boy, Mehmet Erdi Korkmaz (2022) “Impact of hybrid cooling approach on milling and surface morphological characteristics of Nimonic 80A alloy”, Journal of Manufacturing Processes, Elsevier, vol. no. 73, pp. 428-439.
  2. N. Srinivasan, Rajenthirakumar, D., Sridhar, R., & Amutha, P. (2020) “Tribomechanical performance of MgO– ZnO nanoparticles as lubricating additives in the microextrusion process” Part C: Journal of Mechanical Engineering Science, SAGE, Vol. 234, no. 22, pp. 4543-4553.
  3. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Numerical Simulation of Micro Forming of Bio- Absorbable AZ80 Magnesium Alloy”, Advances in Computational Methods in Manufacturing, Springer, no.1, pp 3-11.
  4. N.Srinivasan, D.Rajenthirakumar, R.Sridhar, (2019) “Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation”, International Journal of Advanced Manufacturing Technology, Springer, vol. 102, no. 9-12, pp. 3531-3541.
  5. T.Karthik, D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Influence of roller ball tool in single point incremental forming of polymers”, Technical Gazzette, vol. 26, no. 1, pp. 171-176.
  6. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2018)“Experimental investigations on micro scaled plastic deformation of bio-absorbable magnesium AZ80 alloy”, Procedia Manufacturing, Elsevier, 15, pp.1635–1640.
  7. N. Srinivasan, D. Rajenthirakumar, R. Sridhar, (2017) “Micro Forming – Key Issues and Research Opportunities”, Advances in natural and applied sciences, 11(4), 557-579.
  8. N. Srinivasan, D.Rajenthirakumar, R.Sridhar, (2020) “Combined influence of size effect and temperature in micro scale deformation of 6063 aluminium gear”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, vol. 42 no. 317, pp. 1-10.

Conferences

  1. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Development of a Micro-forming System for Micro-extrusion Process of micro-pin in AZ80 Mg Alloy”, 4th International and 19th National Conference on Machines and Mechanisms, 05-07, December 2019. IIT Mandi, India.
  2. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Numerical investigation on micro forming of bioabsorbable AZ80magnesium alloy, 2nd International conference on computational methods in Manufacturing during March 8-9,2019, organized by IIT Gawahati, India.
  3. D. Rajenthirakumar, N. Srinivasan, R. Sridhar, “Experimental investigations on micro scaled plastic deformationof bio-absorbable Magnesium AZ80 alloy” Metal Forming 2018 conference, Toyohashi University of Technology, Japan, 16-19 September 2018.

Journals

  1. Nimel Sworna Ross, C Gopinath, N. Srinivasan, Munish Kumar Gupta, Ragavanantham Shanmugam, M Saravana Kumar, Mehmet Boy, Mehmet Erdi Korkmaz (2022) “Impact of hybrid cooling approach on milling and surface morphological characteristics of Nimonic 80A alloy”, Journal of Manufacturing Processes, Elsevier, vol. no. 73, pp. 428-439.
  2. N. Srinivasan, Rajenthirakumar, D., Sridhar, R., & Amutha, P. (2020) “Tribomechanical performance of MgO– ZnO nanoparticles as lubricating additives in the microextrusion process” Part C: Journal of Mechanical Engineering Science, SAGE, Vol. 234, no. 22, pp. 4543-4553.
  3. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Numerical Simulation of Micro Forming of Bio- Absorbable AZ80 Magnesium Alloy”, Advances in Computational Methods in Manufacturing, Springer, no.1, pp 3-11.
  4. N.Srinivasan, D.Rajenthirakumar, R.Sridhar, (2019) “Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation”, International Journal of Advanced Manufacturing Technology, Springer, vol. 102, no. 9-12, pp. 3531-3541.
  5. T.Karthik, D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Influence of roller ball tool in single point incremental forming of polymers”, Technical Gazzette, vol. 26, no. 1, pp. 171-176.
  6. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2018)“Experimental investigations on micro scaled plastic deformation of bio-absorbable magnesium AZ80 alloy”, Procedia Manufacturing, Elsevier, 15, pp.1635–1640.
  7. N. Srinivasan, D. Rajenthirakumar, R. Sridhar, (2017) “Micro Forming – Key Issues and Research Opportunities”, Advances in natural and applied sciences, 11(4), 557-579.
  8. N. Srinivasan, D.Rajenthirakumar, R.Sridhar, (2020) “Combined influence of size effect and temperature in micro scale deformation of 6063 aluminium gear”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, vol. 42 no. 317, pp. 1-10.
  9. Dr. G. Vetrichelvi, C-Sey-Smart door lock system, International Organization of Scientific Research – Journal of Engineering, 2019
  10. Chellamuthu S., Sekaran E.C., Fault detection in electrical equipment’s images by using optimal features with deep learning classifier, Multimedia Tools and Applications, 2019
  11. Shanmugam C., Chandira Sekaran E., IRT image segmentation and enhancement using FCM-MALO approach, Infrared Physics and Technology, 2019

Conferences

  1. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Development of a Micro-forming System for Micro-extrusion Process of micro-pin in AZ80 Mg Alloy”, 4th International and 19th National Conference on Machines and Mechanisms, 05-07, December 2019. IIT Mandi, India.
  2. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Numerical investigation on micro forming of bioabsorbable AZ80magnesium alloy, 2nd International conference on computational methods in Manufacturing during March 8-9,2019, organized by IIT Gawahati, India.
  3. D. Rajenthirakumar, N. Srinivasan, R. Sridhar, “Experimental investigations on micro scaled plastic deformationof bio-absorbable Magnesium AZ80 alloy” Metal Forming 2018 conference, Toyohashi University of Technology, Japan, 16-19 September 2018.

Journals

  1. Nimel Sworna Ross, C Gopinath, N. Srinivasan, Munish Kumar Gupta, Ragavanantham Shanmugam, M Saravana Kumar, Mehmet Boy, Mehmet Erdi Korkmaz (2022) “Impact of hybrid cooling approach on milling and surface morphological characteristics of Nimonic 80A alloy”, Journal of Manufacturing Processes, Elsevier, vol. no. 73, pp. 428-439.
  2. N. Srinivasan, Rajenthirakumar, D., Sridhar, R., & Amutha, P. (2020) “Tribomechanical performance of MgO– ZnO nanoparticles as lubricating additives in the microextrusion process” Part C: Journal of Mechanical Engineering Science, SAGE, Vol. 234, no. 22, pp. 4543-4553.
  3. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Numerical Simulation of Micro Forming of Bio- Absorbable AZ80 Magnesium Alloy”, Advances in Computational Methods in Manufacturing, Springer, no.1, pp 3-11.
  4. N.Srinivasan, D.Rajenthirakumar, R.Sridhar, (2019) “Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation”, International Journal of Advanced Manufacturing Technology, Springer, vol. 102, no. 9-12, pp. 3531-3541.
  5. T.Karthik, D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Influence of roller ball tool in single point incremental forming of polymers”, Technical Gazzette, vol. 26, no. 1, pp. 171-176.
  6. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2018)“Experimental investigations on micro scaled plastic deformation of bio-absorbable magnesium AZ80 alloy”, Procedia Manufacturing, Elsevier, 15, pp.1635–1640.
  7. N. Srinivasan, D. Rajenthirakumar, R. Sridhar, (2017) “Micro Forming – Key Issues and Research Opportunities”, Advances in natural and applied sciences, 11(4), 557-579.
  8. N. Srinivasan, D.Rajenthirakumar, R.Sridhar, (2020) “Combined influence of size effect and temperature in micro scale deformation of 6063 aluminium gear”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, vol. 42 no. 317, pp. 1-10.
  9. Dr.Gowtham.P, An Efficient Monitoring of Real Time Traffic Clearance for an Emergency Service Vehicle Using IOT, International Journal for parallel programming-2018
  10. Arumugam, Senthilkumar; Shanmugam, Sathish Kumar; Loganathan, Anbarasu; Palanirajan, Gowtham; Ramachandran, Meenakumari, A novel bridged-insert cascaded five level inverter topology, JOURNAL OF MEASUREMENTS IN ENGINEERING, 2018
  11. S K Kabilesh, Saravanan Subramanian, Finger Vein Recognition Algorithms for Security Application, International Journal of Emerging Technology and Advanced Engineering, 2018
  12. Dr. G. Vetrichelvi, Haptic Based PIN Securing Embedded System, IOSR Journal of Engineering, 2018
  13. Shanmugam S.K.,Palanirajan Gowtham., Ramachandran M., Kanagaraj K.K., Implementation of solar photovoltaic array and battery powered enhanced DC-DC converter using B4-inverter fed brushless DC motor drive system for agricultural water pumping applications, Journal of Vibroengineering, 2018
  14. Kumar S., Shanmugam, Krishamoorthy M., Ramachandran M., Kanagaraj K.K., Solar power based DC-DC converter fed brushless DC motor drive for agricultural applications, Indian Journal of Ecology, 2018

Conferences

  1. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Development of a Micro-forming System for Micro-extrusion Process of micro-pin in AZ80 Mg Alloy”, 4th International and 19th National Conference on Machines and Mechanisms, 05-07, December 2019. IIT Mandi, India.
  2. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Numerical investigation on micro forming of bioabsorbable AZ80magnesium alloy, 2nd International conference on computational methods in Manufacturing during March 8-9,2019, organized by IIT Gawahati, India.
  3. D. Rajenthirakumar, N. Srinivasan, R. Sridhar, “Experimental investigations on micro scaled plastic deformationof bio-absorbable Magnesium AZ80 alloy” Metal Forming 2018 conference, Toyohashi University of Technology, Japan, 16-19 September 2018.

Journals

  1. Nimel Sworna Ross, C Gopinath, N. Srinivasan, Munish Kumar Gupta, Ragavanantham Shanmugam, M Saravana Kumar, Mehmet Boy, Mehmet Erdi Korkmaz (2022) “Impact of hybrid cooling approach on milling and surface morphological characteristics of Nimonic 80A alloy”, Journal of Manufacturing Processes, Elsevier, vol. no. 73, pp. 428-439.
  2. N. Srinivasan, Rajenthirakumar, D., Sridhar, R., & Amutha, P. (2020) “Tribomechanical performance of MgO– ZnO nanoparticles as lubricating additives in the microextrusion process” Part C: Journal of Mechanical Engineering Science, SAGE, Vol. 234, no. 22, pp. 4543-4553.
  3. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Numerical Simulation of Micro Forming of Bio- Absorbable AZ80 Magnesium Alloy”, Advances in Computational Methods in Manufacturing, Springer, no.1, pp 3-11.
  4. N.Srinivasan, D.Rajenthirakumar, R.Sridhar, (2019) “Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation”, International Journal of Advanced Manufacturing Technology, Springer, vol. 102, no. 9-12, pp. 3531-3541.
  5. T.Karthik, D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2019) “Influence of roller ball tool in single point incremental forming of polymers”, Technical Gazzette, vol. 26, no. 1, pp. 171-176.
  6. D.Rajenthirakumar, N.Srinivasan, R.Sridhar, (2018)“Experimental investigations on micro scaled plastic deformation of bio-absorbable magnesium AZ80 alloy”, Procedia Manufacturing, Elsevier, 15, pp.1635–1640.
  7. N. Srinivasan, D. Rajenthirakumar, R. Sridhar, (2017) “Micro Forming – Key Issues and Research Opportunities”, Advances in natural and applied sciences, 11(4), 557-579.
  8. N. Srinivasan, D.Rajenthirakumar, R.Sridhar, (2020) “Combined influence of size effect and temperature in micro scale deformation of 6063 aluminium gear”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, vol. 42 no. 317, pp. 1-10.
  9. G Vetrichelvi, S Sandra, Design of Fast And Low Complexity Fault Tolerant FFTS Using Parseval Check, International journal for science and advance research in technology, 2017.

  10.  

    P. Eswari , S. Mary Praveena, Optimization of Efficacy in Industrial Automation Control and Monitoring System using IIOT, International Journal of Emerging Technology and Advanced Engineering, 2017

Conferences

  1. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Development of a Micro-forming System for Micro-extrusion Process of micro-pin in AZ80 Mg Alloy”, 4th International and 19th National Conference on Machines and Mechanisms, 05-07, December 2019. IIT Mandi, India.
  2. D. Rajenthirakumar, N. Srinivasan, Sridhar R, “Numerical investigation on micro forming of bioabsorbable AZ80magnesium alloy, 2nd International conference on computational methods in Manufacturing during March 8-9,2019, organized by IIT Gawahati, India.
  3. D. Rajenthirakumar, N. Srinivasan, R. Sridhar, “Experimental investigations on micro scaled plastic deformationof bio-absorbable Magnesium AZ80 alloy” Metal Forming 2018 conference, Toyohashi University of Technology, Japan, 16-19 September 2018.
    wpChatIcon